Nc Plumbing License

Posted on by



SECTION .0800 – SPECIAL RESTRICTED LICENSES

Unlimited License: This classification of license allows for work of any size. The individual must also have a working capital of $150,000 and a surety bond of at least $2,000,000. North Carolina Plumbing License Reciprocity. North Carolina does not offer plumbing license reciprocity agreements between states. North Carolina State Building Code: Residential Code 2018. This comprehensive code combines building, plumbing, mechanical, fuel gas, energy, and electrical provisions into a single resource and uses these provisions to provide detailed insight. A school of engineering of the Greater University of North Carolina, one member who is a plumbing or mechanical inspector from a city in North Carolina, one licensed air conditioning contractor, one licensed plumbing contractor, one licensed heating contractor, one licensed fire sprinkler contractor, and one person who has no tie with the.

.0801. GENERAL PROVISIONS
.0802. ESTABLISHING A SPECIAL RESTRICTED CLASSIFICATION
.0803. SCOPE OF SP-SFD LICENSE
.0804. SCOPE OF SP-FA/LV LICENSE
.0805. EXEMPTION OF CERTAIN LOW VOLTAGE WIRING SYSTEMS
.0806. SCOPE OF SP-EL LICENSE
.0807. SCOPE OF SP-PH LICENSE
.0808. SCOPE OF SP-WP LICENSE
.0809. SCOPE OF SP-ES LICENSE
.0810. SCOPE OF SP-SP LICENSE

.0801. GENERAL PROVISIONS

(a) Types. A special restricted electrical contracting license classification is a classification established pursuant to G.S. 87-43.3 or by G.S. 87-43.4. Its purpose is to license persons, partnerships, firms, or corporations to engage or offer to engage in only a limited phase of electrical contracting work. Each special restricted license classification is separate from all other special restricted and regular license classifications. The General Assembly created the special restricted single family dwelling electrical contracting license in G.S. 87-43.4. Pursuant to
G.S. 87-43.3, the Board has established the following special restricted electrical contracting licenses:

(1) fire alarm/low voltage wiring license (SP-FA/LV);

(2) elevator license (SP-EL);

(3) plumbing, heating, and air conditioning license (SP-PH);

(4) groundwater pump license (SP-WP);

(5) electric sign license (SP-ES); and

(6) swimming pool license (SP-SP).

(b) Limited Scope. A special restricted contracting license does not authorize the licensee to engage or offer to engage in the business of electrical contracting in general. It authorizes the licensee to engage or offer to engage only in the limited phase of electrical contracting described in the Rule in this Section that specifies the scope of the applicable special restricted license.

(c) No Project Value Limit. The limitations concerning the dollar value of projects that may be undertaken by a limited or an intermediate licensee do not apply to special restricted licensees. Thus, the holder of a special restricted license may engage or offer to engage in any project authorized by the license regardless of the dollar value of the project.

(d) Effect of Regular License. A licensee in the regular license classifications, whether limited, intermediate or unlimited, is qualified to engage or offer to engage in any activity authorized by a special restricted license, subject to the project value limitations contained in G.S. 87-43.3, and does not have to obtain a special restricted license.

Website Of you purchased the domain through Website Forge - you should of received an email for renewal. Contact support to verify. You or someone in your organization may have misconfigured your DNS settings. Your DNS settings should be Primary: altns1.websiteforge.com and Secondary: altns2.websiteforge.com. Contact your registrar, the company you. We’re stewarding a richer future for all by building private market product & service solutions to help fuel a thriving innovation economy. The Innovation Economy. A powerful ecosystem of innovators and thinkers conceiving the ideas that will make the world better and the investors, supporters and venture capitalists who propel these dreams into realities. The reality of a. Hi, I am Mayur Chandpara your instructor here and the voice behind the text on this site.I have dreamed of making a web presence from where people like me can learn the common passion we share. It all started in 2011, I was very close to my schooling and reading and collecting new knowledge from the web. Our offerings extend from 1869 through 2019, focusing on the best that the steam and transitional eras had to offer. We are among the only content developers for Trainz that frequently model 1890s and early 1900s equipment.

History Note: Authority G.S. 87-42; 87-43.3; 87-43.4;
Eff. October 1, 1988; Amended Eff. January 1, 2010; February 1, 1995; February 1, 1990.

.0802. ESTABLISHING A SPECIAL RESTRICTED CLASSIFICATION

(a) The Board shall establish a special restricted license classification pursuant to G.S. 87-43.3 when it finds that:

(1) the licensees who hold regular electrical contracting licenses are not meeting the need for the proposed electrical work to be authorized by the special restricted license; and

(2) establishing the special restricted license classification serves the public interest.

(b) The Board shall establish special restricted license classifications by rule-making conducted pursuant to the requirements of G.S. 150B, Article 2A.

History Note: Authority G.S. 87-42; 87-43.3;
Eff. October 1, 1988;
Amended Eff. May 1, 1999.

.0803. SCOPE OF SP-SFD LICENSE

(a) The following definitions apply in determination of the scope of work available to the holder of a SP-SFD license:

(1) “Ancillary” with reference to the scope of a single family residential dwelling license, is an appurtenance or out-building or similar structure associated with the single family dwelling such as a detached residential garage or carport, a farm or household equipment storage shed, a barn, a pump house, an electric fence, or yard lighting.

(2) “Habitation” means the occupancy of dwelling primarily or exclusively for residential purposes and includes the incidental use of the dwelling or its ancillaries for a business, commercial, or professional activity, such as providing hair dressing, medical, legal, consulting, or tax services, if:

(A) the activity is incidental to the primary use of the dwelling as a residence;

(B) no stock-in-trade is either displayed or sold on the premises; and

Nc Plumbing License Board

(C) the full-time or part-time services of no more than one person who does not live at the dwelling are used in the activity.

(3) A “single family residential dwelling” is a building or a manufactured home that is designed and used only for habitation by one family and is not physically attached to any other building or structure. Cabanas, porches, room additions, and ancillary structures are considered part of a single family dwelling if they are designed for and used only for residential purposes by the occupants of the dwelling.

(b) A special restricted single family residential dwelling electrical contracting license (SP-SFD) authorizes the licensee to install, maintain, or repair only electrical wiring and devices that are in or on a single family residential dwelling or are ancillary to a single family residential dwelling. Electrical work within the scope of another special restricted license may be performed by a SP-SFD licensee without obtaining the other special restricted license as long as it is in or on a single family residential dwelling or is ancillary to a single family residential dwelling.

History Note: Authority G.S. 87-42; 87-43.4;
Eff. October 1, 1988;
Amended Eff. July 1, 2011.

.0804. SCOPE OF SP-FA/LV LICENSE

(a) Definition. As used in this Chapter, fire alarm, burglar alarm and low voltage wiring systems are defined as:

(1) wiring systems of 50 volts or less and control circuits directly associated therewith;

(2) wiring systems that have a voltage in excess of 50 volts and consist solely of power limited circuits meeting the definition of a Class II or Class III wiring system in the National Electrical Code or paging systems not in excess of 70 volts;

(3) line voltage wiring that has a voltage not in excess of 300 volts to ground and is installed from the load-side terminals of a disconnecting means or from a junction box, either of which has been installed by others, for the specific purpose of supplying the low voltage wiring system involved. Some low voltage wiring systems that meet this definition are exempt under Rule .0805.

(4) interconnected components wired to a common control panel either as a standalone fire alarm system or as part of a combination burglar/fire system to monitor and annunciate the status of evidence of flame, heat, smoke, or water flow within a building or structure in accordance with the requirements of the N.C. State Building Code and NFPA 72; or

(5) alarm systems for devices used to detect burglary or theft as defined in G.S. 74D-2(a).

(b) Scope. A special restricted fire alarm/low voltage electrical contracting license authorizes the licensee to install, maintain, or repair only low voltage wiring and directly related wiring. Wiring is directed related if it:

(1) originates at the load-side terminals of a disconnecting means or junction box that:

(A) has been installed, complete with line-side connections, by others for the specific purpose of supplying the low voltage wiring system involved; and

(B) is permanently and legibly marked to identify the low voltage wiring system supplied; and

(2) is not installed in a location considered as hazardous under the National Electrical Code.

History Note: Authority G.S. 87-42; 87-43.3;
Eff. October 1, 1988;
Amended Eff. July 1, 2011; January 1, 2010

.0805. EXEMPTION OF CERTAIN LOW VOLTAGE WIRING SYSTEMS

(a) Exemption. Except a fire alarm, burglar alarm or low voltage wiring system as defined in Rule .0804, the installation, maintenance, or repair of low voltage wiring systems may be performed by those not licensed by the Board if all of the following conditions are met:

(1) the system is not required by the N. C. State Building Code;

(2) the low voltage control circuit and power supply is a Class II or Class III system as defined in the National Electrical Code other than that described in Rule .0804;

(3) the system operates at a voltage not in excess of 50 volts or meets the provisions for sound-recording and similar equipment in the National Electrical Code;

(4) no part of the system is installed in an area considered as hazardous under the National Electrical Code;

(5) the system is current limited or protected by a circuit breaker, fuse, or other current limiting device; and

(6) a failure in the system would not, in the opinion of the electrical inspector having jurisdiction, create a shock or fire hazard to persons or property.

History Note: Authority G.S. 87-42; 87-43.3;
Eff. October 1, 1988; Amended Eff. January 1, 2010.

.0806. SCOPE OF SP-EL LICENSE

A special restricted elevator electrical contracting license (SP-EL) authorizes the licensee to install, maintain, or repair electrical wiring only as an incident to the licensee’s elevator, dumbwaiter, escalator, moving walk, or personnel hoist business. Furthermore, the license authorizes the licensee to install, maintain, or repair only electric wiring that:

(1) is an integral part of an elevator, dumbwaiter, escalator, moving walk, or personnel hoist;

(2) is electrically isolated from the building wiring such as a safety switch or circuit breaker, that has been installed, complete with line-side connections, by others; and

(3) originates at the load-side terminals of the protective isolating device, referred to as “beyond the disconnection means.”

History Note: Authority G. S. 87-42; 87-43.3;
Eff. October 1, 1988.

.0807. SCOPE OF SP-PH LICENSE

A special restricting plumbing, heating, and air conditioning electrical contracting license (SP-PH) authorizes the licensee to install, maintain, or repair electric wiring or devices only as an incident to the licensee’s plumbing, heating, or air conditioning business. Furthermore, the license authorizes the licensee to install, maintain, or repair only wiring that is directly related to plumbing, heating, or air conditioning equipment and that:

(1) is restricted to circuits or parts of circuits that operate at voltages not exceeding 600 volts, phase-to-phase;

(2) is electrically isolated from the building wiring system by an overcurrent protective isolating device, such as a fused switch or circuit breaker, that:

(a) has been installed, complete with line-side connections, by others;

(b) is permanently and legibly marked to identify the equipment served by the device; and

(c) is located within an enclosure intended solely for, and limited to, serving the specific plumbing, heating, or air conditioning equipment involved, or is located within a panelboard that serves the building wiring system and is likewise permanently and legibly marked to identify the equipment served by the device, provided wiring is installed by others from the load-side terminals of the device to a junction box, auxilliary gutter, or similar disconnecting means located outside the panelboard, but in sight of and within 50 feet of, the plumbing, heating, or air conditioning equipment served;

(3) originates at the load-side terminals of the protective isolating device;

(4) except for control wiring, is physically adjacent to the plumbing, heating, or air conditioning equipment from the equipment. Control wiring that receives its control power from the plumbing, heating, or air conditioning equipment involved may extend beyond these limits if the control voltage does not exceed 120 volts to ground and the wiring is protected from overcurrent; and

(5) is not installed in a location considered as hazardous under the National Electrical Code.

History Note: Authority G.S. 87-42; 87-43.3;
Eff. October 1, 1988.

.0808. SCOPE OF SP-WP LICENSE

A special restricted groundwater pump electrical contracting license (SP-WP) authorizes the licensee to install, maintain, or repair electric wiring only as an incident to the licensee’s groundwater pump business. Furthermore, the license authorizes the licensee to install, maintain, or repair only wiring that is directly related to a groundwater pump and that:

(1) is restricted to circuits or parts of circuits that operate at voltages not exceeding 600 volts, phase-to-phase;

(2) is electrically isolated from the building wiring system by an overcurrent protective isolating device that:

Nc plumbing exam practice test

(a) has been installed, complete with line-side connections, by others;

(b) is permanently and legibly marked to identify the equipment served by the device; and

(c) is located adjacent to the controller for the specific groundwater pump equipment involved and within an enclosure intended solely for, and limited to, serving that equipment;

(3) originates at the load-side terminals of the protective isolating device; and

(4) is not installed in a location considered as hazardous under the National Electrical Code.

History Note: Authority G.S. 87-42; 87-43.3;
Eff. October 1, 1988.

.0809. SCOPE OF SP-ES LICENSE

(a) Definitions. As used in this Rule:

(1) “Electric sign” means fixed, stationary, or portable self-contained, electrically illuminated utilization equipment that has words or symbols designed to convey information or attract attention. The term includes outline lighting.

(2) “Outline lighting” means an arrangement of incandescent lamps or electric discharge tubing that outlines or otherwise calls attention to certain features, such as the shape of a building or the decoration of a window.

(b) Scope of License. A special restricted electric sign electrical contracting license (SP-ES) authorizes the licensee to install, maintain, or repair electric wiring or devices only as an incident to the licensee’s electric sign business. Furthermore, the license authorizes the licensee to install, maintain, or repair only wiring that is directly related to electric signs and is electrically isolated from the building wiring system. Wiring that is directly related differs depending on the type sign involved:

(1) Except for electric signs described in Paragraphs (2), (3), and (4) of this Rule, related wiring is the portion of the electric sign wiring that originates at the load-side terminals of a disconnecting means located immediately adjacent to the electric sign involved, or originates within a junction box so located. Related wiring does not include the installation of the disconnecting means, complete with line-side connections, or the installation of the junction box, complete with free-length circuit conductors to accommodate the connection of the related wiring in the box.

(2) For electric sign installations having sign transformers installed physically apart from the sign, related wiring is the portion of the electric sign wiring that originates at the load-side terminals of a disconnecting means located immediately adjacent to the sign transformer supplying the electric sign involved, or originates within a junction box so located. Related wiring does not include the installation of the disconnecting means, complete with line-side connections, or the installation of the junction box, complete with free-length circuit conductors to accommodate the connection of the related wiring in the box.

(3) For free-standing electric sign installations supplied through underground circuit conductors, related wiring is the portion of the electric sign wiring that originates at a wiring termination point located at, within, or immediately above the permanent base for the sign structure. Related wiring does not include the installation of:

(A) a junction box, located at, within or immediately above the permanent base for the sign, complete with free-length circuit conductors to accommodate the connection of the related wiring; or

(B) if the base of the structure is suitable for use as a raceway, the installation of bushing, complete with free-length circuit conductors extending through to accommodate the connection of the related wiring within the sign structure raceway.

(4) For electric signs specifically designed to be connected directly to the building wiring raceway or cable supply, related wiring is the portion of the electric sign wiring that originates at the point where the free-length circuit conductors extend through the building wiring raceway or cable at the specifically designed supply location for the electric sign involved. Related wiring does not include the installation of the building wiring raceway or cable system to the specifically designated point of supply for the electric sign involved, complete with free-length circuit conductors extending through the building wiring raceway or cable to accommodate the connection of the related wiring.

(5) Except for the related wiring on the secondary side of sign transformers, related wiring is restricted to circuits or parts of circuits that operate at voltages not exceeding 600 volts, phase-to-phase.

(6) No related wiring, or any part thereof, may be installed in a location considered as hazardous under the National Electrical Code.

History Note: Authority G.S. 87-42; 87-43.3;
Eff. October 1, 1988; Amended Eff. February 1, 1990.

.0810. SCOPE OF SP-SP LICENSE

A special restricted swimming pool electrical contracting license (SP-SP) authorizes the licensee to install, maintain, or repair swimming pool bonding work only as an incident to the licensee’s business of installing, maintaining, or repairing swimming pools. Furthermore, the license authorizes the licensee to perform only the:

(1) Bonding together of all of the following metal parts on or near a swimming pool installation:

Nc Plumbing License

(a) all metal parts of the pool structure, including the reinforcing metal of the pool shell, coping stones, and deck;

(b) all forming shells;

(c) all metal fittings within or attached to the pool structure; and

Nc Plumbing License

(d) all metal conduit, metal piping, fixed metal parts.

(2) Installation of a common bonding grid, bonding together all parts listed in Subdivision (1);

(3) Installation of the forming shells for lighting fixtures and underwater audio equipment;

(4) Installation of the conduits extending from the lighting fixture and audio equipment forming shells to deck or junction boxes and the installation of the deck or junction boxes;

(5) Installation of the lighting fixtures and audio equipment in their respective forming shells from the forming shells to the deck or junction boxes, leaving appropriate leads in the deck or junction boxes to which the circuit conductors can be connected by others; and

(6) Installation of a bonding conductor and from the point of its connection to the common bonding grid to a readily accessible point at the circulating pump location.

History Note: Authority G.S. 87-42; 87-43.3;
Eff. October 1, 1988.

Address

Phone

Fax

North

As with obtaining a general contractor’s license in North Carolina, becoming a licensed plumber will be done entirely through the North Carolina Licensing Board for General Contractors. This includes payments, audits, examinations, and all facets regarding a contractor’s license. There are several classes of contractor licenses that are available and they include:

  1. Limited License: This classification of license allows for work that surpasses $500,000. The individual must also have a working capital of $17,000, a net worth of $80,000, and a surety bond of at least $350,000;
  2. Intermediate License: This classification of license allows for work that surpasses $1,000,000. The individual must also have a working capital of $75,000 and a surety bond of at least $1,000,000;
  3. Unlimited License: This classification of license allows for work of any size. The individual must also have a working capital of $150,000 and a surety bond of at least $2,000,000.

North Carolina Plumbing License Reciprocity

North Carolina does not offer plumbing license reciprocity agreements between states. There are some misconceptions about the license reciprocity because the state of North Carolina offers electrical license reciprocity agreements, but this does not cross over to the plumber licensing.

North Carolina Plumbing License Types

North Carolina differs from most states because their licensing operates entirely at the state level, and there are no journeyman or master plumbers — only plumbing contractors. The types of contractor plumbing licenses available in North Carolina are:

  • P-I Contractor (Plumbing-Class I): Operates on potable water and drain, waste, vent piping systems in any type of building;
  • P-II Contractor (Plumbing-Class II): Operates on potable water and drain, waste, vent piping systems in single-family housing that is detached from others (no apartments, duplexes, etc.);
  • RLP Contractor (Restricted Limited Plumbing): Operates on interior/exterior building sewer piping, and water filtration systems.

In order to obtain one of the following licenses you will need to do the following:

  1. Purchase and look over the Licensing Board’s Laws and Rules book;
  2. Meet the state requirements of 2 years of technical training and 2,000 hours of on-the-job training, or 4,000 hours of on-the-job training;
  3. Fill out and mail a license examination application and enclose associated testing fees;
  4. Take — and pass — the state examination test.

The completed application and examination fee of $25 can be sent via check to:

State Board of Examiner of Plumbing
Heating and Fire Sprinkling Contractors
1109 Dresser Court
Raleigh, NC 27609

Plumbing License Exam

In order to become licensed in the state of North Carolina, you must take (and pass) the North Carolina licensing exam. The exam needs to be taken at a PSI testing center, and a score of 70% is considered passing. The exam costs $100 to take, and it consists of 100 multiple choice questions with an allotted time of four hours. There are plumbing practice tests available to help go over the types of questions on the exam.

Plumbing Apprenticeship Requirements

Before you can apply to become a plumber, you need to have either a combination of two years of technical training in a trade school alongside proof of experience apprenticing under a plumber that is licensed within North Carolina, or four years of training under the direct supervision of a licensed plumber in North Carolina. The two options follow as such when broken down into hours:

  1. 2 years of technical schooling and 2,000 hours apprenticing;
  2. 4 years — or 4,000 hours — of apprenticing.

North Carolina Plumbing Apprentice Jobs

Apprentice jobs are available through the North Carolina Department of Commerce. It is also recommended by many that have entered the field to speak with someone that is actively practicing the trade, or your regional representative. Other resources to help find plumbing apprentice jobs are:

  • Online job boards such as Indeed, Glassdoor, Ziprecruiter, and Linkedin;
  • Utilizing career centers within a plumbing trade school;
  • Connecting with a head-hunter or recruitment coordinator;
  • Cold-calling plumbing businesses.

Plumbing Trade Schools in North Carolina

School: Cleveland Community College
Tuition: $3,841/year
Contact Info: (704) 484-4000
Address: 137 S Post Road, Shelby, NC 28150

School: Forsyth Technical Community College
Tuition: $6,675/year
Contact Info: (336) 723-0371
Address: 2100 Silas Creek Parkway, Winston-Salem, NC 27103

School: Haywood Community College
Tuition: $7,321/year
Contact Info: (828) 627-2821
Address: 185 Freedlander Drive, Clyde, NC 28721

Free Download specifications 100% CLEAN report malware. Send text messages, pictures and ringtones from your computer to a cell phone number, through an attached modem, mobile phone or an Internet. Download SMS-it from official sites for free using QPDownload.com. Additional information about license you can found on owners sites. How do I access the free SMS-it download for PC? Just click the free SMS-it download button at the top left of the page. Clicking this link will start the installer to download SMS-it free for Windows. Smsit download free online. Download SMS-It for Windows to send SMS (text, pictures, ringtones) to a mobile phone. 3 months free with 1-year plan. Download Now Best for customer support $39.99 for the first 12 months.

School: Stanly Community College
Tuition: $6,316/year
Contact Info: (704) 982-0121
Address: 141 College Drive, Albemarle, NC 28001

School: Wake Technical College
Tuition: $11,000/year
Contact Info: (919) 662-3515
Address: 9101 Fayetteville Road, Raleigh, NC 27603

North Carolina Professional License Search

Nc Electrical License Lookup

In order for a company — or an individual looking to hire a contractor — to validate and verify licensing credentials that a potential-hire possesses, they can utilize the North Carolina business & occupational license database to authenticate a license.

Nc Plumbing License Requirements

Image Source: https://pixabay.com/